Ruide Disteo 23 - Hset; 5 Distance Measurement; Distance

6
4.2 HSet
Press HSet to go the screen of setting horizontal
angel.
Input a value of the angle to set as the current
horizontal angle. And press OK to confirm.
5. DISTANCE MEASUREMENT
The function of distance measurement covers
measuring and displaying vertical distance (VD),
horizontal distance (HD), slope distance (SD), stake
out (S.O.), and setting of measuring mode (Mode),
etc.
5.1 Distance
Aim at the center of the target prism through the
optical eyepiece by adjusting the focus, and
press Meas to start the distance measurement.
Meas:
Start to measure the distance.
S.O.:
Start to stake out the distance.
Mode:
Setting of the measuring mode