Ruijie Reyee RG-ES218GC-P User Manual

Ruijie Reyee-Hotel Solution Cookbook Basic Configuration
20
Parameter
Description
If the service network created is used for both wired
and wireless client access, and the corresponding
wired service network (such as a wired network for
guests) exists, click Select to select a VLAN ID from
Existing VLANs, and then click it to add a wireless
network based on the wired service network
Default
Gateway/Subnet
Mask
When the VLAN ID is configured, the value of the
default gateway or the subnet mask will be updated
automatically 1s later.
DHCP Pool
You are advised to keep the default configuration.
If the DHCP pool is disabled, a camera or PC needs to
be manually configured with a static IP address.
The deployment location of the IP address pool can
be selected as needed. Generally, the gateway used
as the DHCP server is applicable to a Layer 2 network,
and the core switch used as the DHCP server is
applicable to a Layer 3 network.
IP Segment
The parameter is available only when the DHCP pool
is enabled. After the VLAN ID is configured, the IP
segment will be updated automatically 1s later.
Assign IP from
The parameter is available only when the DHCP pool
is enabled. You are advised to keep the default
configuration.
(4) Confirm the WLAN network configuration and click Apply. The configuration will be
delivered to the gateway, switch, and AP, and takes effect.

Ruijie Reyee RG-ES218GC-P Specifications

General

Brand	Ruijie
Model	Reyee RG-ES218GC-P
Category	Switch
Language	English