Ruijie Reyee-Hotel Solution Cookbook Basic Configuration
14
3.2.2 Procedure
(1) Adding a wired VLAN: Click Add and select Add wired VLANs to add wired VLAN
configuration for the current network or select an existing wired VLAN and click
Configuration.
(2) Setting service parameters: Set the VLAN for wired access and create a Dynamic Host
Configuration Protocol (DHCP) address pool for devices in the VLAN to automatically
obtain IP addresses. The gateway can serve as the address pool server to assign
addresses to access clients. If a core switch supporting the address pool function is
deployed on a network, you can configure the switch as the address pool server.
After configuring service parameters, click Next.
To Next Page
Loading...
