Ruijie Reyee-Hotel Solution Cookbook Advanced Configuration
42
Note
The querier version cannot be higher than the global IGMP version. When the global
IGMP version is lowered, the querier version is lowered accordingly.
If no querier source IP is configured, the device management IP is used as the source IP
address of the querier.
4.3 Wi-Fi Optimization
4.3.1 Application Scenario
Wi-Fi optimization is an intelligent and automatic RF optimization scheme tailored for
complex scenarios with multiple APs. This function is supported by enterprise APs, most
Reyee APs, and EGs. After the device enabled with Wi-Fi optimization collects spatial
information, including the SSID, channel, signal strength, and client status (for example,
transfer rate, delay, packet loss rate), it analyses information through the intelligent
algorithm to provide the optimal network solution (channel and power planning for each
AP), and automatically adjusts the configuration of APs on the network.
4.3.2 Procedure
(1) Log in to Ruijie Cloud, choose Project > Configuration > Network-wide > Optimization >
Wi-Fi Optimization.
(2) Click Optimize Now to optimize the Wi-Fi network.
To Next Page
Loading...
Need help?
General