Ruijie Reyee RG-NBS Series

Web-based Configuration Guide Security
105
Parameter
Description
match all protocol type numbers.
Src Mac
Match the MAC address of the source host. Check All to match all source
MAC addresses
Dest MAC
Match the MAC address of the destination host. Check All to match all
destination MAC addresses
Note
● ACLs cannot have the same name. Only the name of a created ACL can be edited.
● An ACL applied by a port cannot be edited or deleted. To edit, unbind the ACL from the port first.
● There is one default ACL rule that denies all packets hidden at the end of an ACL.
7.3.3 Applying ACL Rules
Choose Local Device > Security > ACL > ACL List.
Click Batch Add or Edit in the Action column, select the desired MAC ACL and IP ACL for ports, and click OK.
Note
Currently, ACLs can be applied only in the inbound direction of ports, that is, to filter incoming packets.