Web-based Configuration Guide Basic Management
44
2. Procedure
Choose Local Device > VLAN > Port List.
Configure port VLANs in a batch: Click Batch Edit, select the port to be configured on the port panel, and select
the port mode. If the port mode is Access port, you need to select Access VLAN; if the port mode is Trunk port,
you need to select Native VLAN and enter the allowed VLAN ID range; if the port mode is Hybrid port, you need
to select Native VLAN and enter the allowed VLAN range and Untag VLAN range. Click OK to complete the
batch configuration.
Note
In Hybrid mode, the allowed VLANs include Tag VLAN and Untag VLAN, and the Untag VLAN range must
include Native VLAN.
Configure one port: In Port List, click Edit in the last Action column of a specified port, configure the port mode
and corresponding VLAN, and click OK.
To Next Page
Loading...
