Cookbook Configuration
65
Restarting the Device
In SON mode, select Local Device mode and choose System > Reboot.
In standalone mode, choose System > Reboot.
You can restart the device immediately or set a scheduled restart.
Restart the device immediately.
On the Reboot tab page, click Reboot and click OK in the confirmation box. Reboot allows you to restart
the device immediately.
The device is restarted, and you need to log into the Eweb management system again after the restart. Do
not refresh the page or close the browser during the restart. After the device is successfully restarted, you
will be redirected to the login page of the Eweb management system.
Set a scheduled reboot.
Switch to the Scheduled Reboot tab page, enable scheduled reboot, set the scheduled day and time, and
click Save.
AP LED
Note
The LED Status Control function is not supported in the standalone mode (the SON is not enabled).
In Network mode, choose Network > LED.
Enable or disable the LED of all downlink APs on the network and click Save.