EasyManua.ls Logo

Ruijie RG-WALL 1600-Z3200-S - Optional Hard Disk Module

Ruijie RG-WALL 1600-Z3200-S
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Hardware Installation and Reference Guide Overview
4
1.4 Hard Disk
The Z3200-S firewall can be equipped with the RG-NSEC-HDD-1T module to store logs and report data. Figure
1-3 shows the appearance of the hard disk.
Figure 1-3 RG-NSEC-HDD-1T Appearance
Table 1-4 Hard Disk Specifications
Model
RG-NSEC-HDD-1T
Firewall Model
RG-WALL 1600-Z3200-S
Dimensions (H x W x D)
27 mm x 130 mm x 102 mm (1.06 in. x 5.12 in. x 4.02 in.)
Type
Hard disk drive
Capacity
1 TB
Hot Swapping
Not supported
Note
The hard disk has built-in software that uses third extended filesystem (ext3). It supports plug-and-play.
The hard disk does not support hot swapping. Before inserting the hard disk, power off the firewall. After
inserting the hard disk, restart the firewall.
Caution
During the transfer and use of the hard disk, avoid vibration and shock.
The original package of the hard disk must be used for transportation.
At an altitude above 3000 m, the hard disk may not function properly.
When operating the hard disk, do not drop it, press the surface, or cover the air vent.

Related product manuals