All aircraft arms are folded before ship out of the factory. Please
follow the steps below to unfold the arms.
F11GIM2 User Manual
6.5 Charging the Controller
7 Drone
Copyright ©2022 Ruko All Rights Reserved.
22
Phone Adapter: 5V--3A
(Not Included)
USB Adapter
(5V/3.0A)
Charging Time: About 2 Hours
(Depending on Charging Adapter)
The Remote Control Is Charging Fully Charged With Remote Control
Unfold the front arms
Take off the Gimbal Cover
7.1 Preparing the Aircraft
When the remote control is charging, the LED screen will indicate
the battery level, when fully charged, it will indicate "BAT 100 PCT"
Controller is built-in 3.7V 1500mAh lithium polymer battery. Use the
original type-C cable to connect an AC power adapter (5V/3A) to
charge. It takes apporximately 2hours to full charge the remote
controller. The charing time depends on what adapter are using,
suggest to use charger with output currency 5V/3A.Never
overcharge.
To Next Page
Loading...
