RUKO F11MINI - Return to Home; Return to Home (RTH) Function; Home Point; Smart RTH

When the pilot needs the aircraft to return home automatically, he can
click the smart RTHbutton on remote controller or tap the return
on the Ruko Mini app to activate RTH. During the return home,
short press the smart return button on the remote controller or click the
return icon on the F11MINI interface again to exit the return home.
3.3 Return to Home
The F11MINI aircraft has an automatic return-to-home function in
GPS mode, making the aircraftreturn to the take-off point.
The Return to Home (RTH) function brings the aircraft back to the
last recorded home point.There are three types of RTH: Smart RTH,
Low Battery RTH, and Signal Disconnection RTH. If you activate the
RTH function under the condition that the aircraft successfully
recorded the home point and GPS signal is good, the aircraft will
automatically return to the home pointand land.
Home Point
When flying outdoors, the GPS signal
icon is displayed with 3 bars or more for
the first time, and the take-off location
will record the aircraft'st current position
as the Home Point.During the flight, if the
aircraft lands at a new location, the point
from which you retook off will become
the latest home point, and the aircraft
will return to the latest home point.
Using 5 bars
of signal
GPS Description
Smart RTH
13Copyright ©2022 Ruko All Rights Reserved.
F11MINI User Manual
3.3 Return to Home