RUKO F11MINI - Gyroscope Calibration

Make sure the aircraft is placed on level ground.
Tap the icon on app to calibrate the gyroscope or pull the
left and right joysticks of the remote controller into 7 o'clock position
together.
46
Copyright ©2022 Ruko All Rights Reserved.
F11MINI User Manual
The aircraft must be calibrated with the compass every time it
is turned on before it can take off. The aircraft light turns yellou
and flashes slowly after pairing, the aircraft can
be calibrated in steps ① and ②.
When the aircraft is flying in a circle or out of control in a
complex environment, the aircraft compass calibration is not
standard or interfered. Please land the aircraft manually in time
to manually calibrate the aircraft (refer to the first step of
calibrating the compass).
When calibrating the aircraft, please open the arm to avoid the
influence of the magnetic field of the motor.
If the user want to calibrate the compass again, press
on the remote controller to enter the compass calibration
process.
6.6 Gyroscope Calibration
CALIBRATE
①
②
The aircraft starts to calibrate the gyroscope automatically when the
rear light flashes fast.
The gyroscope calibration is completed when the light changes back
to the original light state.
③
④