The remote controller pairs with aircraft successfully if the light
on the remote controller changes from fast flashing to steady
on.
Before each flight, check the power of the remote controller.
The indicator light on remote controller will flash and the
remote controller will "beep" when the battery is low.
When using the remote controller handle to hold a mobile
phone, be sure to press it firmly to prevent the mobile phone
from slipping off.
Keep the battery at around 3.8-3.9V, and recharge it every
month or so to keep the battery active.
Please remember to turn off the power of the remote controller
①
Before each aircraft flight, you need to link with theremote controller.
After the linking is successful,you can control the flight of the aircraft.
The steps for the pairing are as follows:
Turn on aircraft.
②
Turn on remote controller.
③
Click the left stick of remote controller up to 12 o'clock position
and down to 6 o'clock position, and after the aircraft emits a beep,
it means the linking is successful.
33Copyright ©2022 Ruko All Rights Reserved.
F11MINI User Manual
4.4 Linking the remote controller
To Next Page
Loading...
