RUKO F11MINI - Lost Signal RTH

When the remote controller has low battery or is turned off or loses
signal for 10 seconds, the aircraft will enter the auto-return mode
and return to the take-off point.
If the signal is recovered during the return home process, the aircraft
will stop returning and rebind with the remote controller signal, and
the remote control can control the aircraft again at this time.
Automatic Return to Home process when signal is lost:
Aircraft stores its position when taking off after the GPS signal is
successfully received,and records it as the home poin
Trigger RTH (triggered by low battery of remote controller, signal
loss, etc.).
After triggering the Return-to-Home function, the aircraft adjusts the
nose direction andstarts to return home.
The aircraft automatically flies to the top of the home point, then
starts to land, and completes the home return.
①
③
④
②
Lost Signal RTH
When out of control, the aircraft cannot avoid obstacles.
When the GPS signal is weak, the aircraft cannot return to
home automatically.
Signal interruption
17Copyright ©2022 Ruko All Rights Reserved.
F11MINI User Manual