44
Copyright ©2022 Ruko All Rights Reserved.
F11MINI User Manual
When the Android phone is connected to aircraft Wi-Fi (named
Ruko_F11_Mini_5G_******), as the aircraft Wi-Fi has no
network, wait for about 10-40 seconds on the phone Wi-Fi
setting page, the phone will pop up the network setting option
to ask whether to continue connect to aircraft Wi-Fi, please set
it continue to use aircraft Wi-Fi, so as not to cause to the app to
be unable to see the image transmission screen.
Please turn off the VPN switch of the phone to avoid the app
not being able to see the image transmission screen.
If the mobile phone is set to priority on internet speed and the
app cannot see the image transmission screen, please set the
mobile phone to airplane mode and try.
Aircraft image transmission Wi-Fi is 5G, mobile phone WLAN
function must be supported;
dual-band Wi-Fi, 2.4G+5G, can be applied.
The aircraft Wi-Fi can only support one mobile phone. When
one mobile phone is connected to the aircraft Wi-Fi, other
mobile phone will not be able to connect to the Wi-Fi.
Click on the app to enter the
control interface. Wi-Fi
connection is successful if the
mobilephone displays the
compass calibration screen of
the aircraft.
③
To Next Page
Loading...
