Ryobi TS1144 User Manual

WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
ADVERTENCIA: Para
reducir el riesgo de lesiones, el usuario
debe leer y comprender el manual del
operador antes de usar este producto.
AVERTISSEMENT : Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
TABLE OF CONTENTS
****************
 General Safety Rules .......................2-3

Miter Saw Specific Safety Rules .....3-4

Additional Safety Rules ...................4-5

Symbols ..............................................6

Electrical ............................................. 7

Glossary of Terms ..............................8

Features .........................................9-12

Tools Needed ...................................13

Loose Parts List ................................13

Assembly .....................................14-20

Operation .....................................21-28

Adjustments .....................................29

Maintenance ..................................... 30

Parts Ordering / Service ..... Back Page
TABLE DES MATIÈRES
****************
 Règles de sécurité générales ..........2-3

Règles de sécurité scie à onglets ....3-4

Règles de sécurité supplémentaires ... 4-5

Symboles ............................................6

Caractéristiques électriques ...............7

Glossaire ............................................8

Caractéristiques ............................9-12

Outils nécessaires ............................13

Liste des pièces détachées ..............13

Assemblage .................................14-20

Utilisation .....................................21-28

Réglages ...........................................29

Entretien ...........................................30

Commande de pièces /
réparation
......................... Page arrière
ÍNDICE DE CONTENIDO
****************
 Reglas de seguridad generales .......2-3
 Reglas de seguridad sierra
ingleteadora ....................................3-4
Advertencias de seguridad
adicionales
......................................4-5
 Símbolos ............................................6
 Aspectos eléctricos ............................ 7
 Glosario de términos ..........................8
 Características ..............................9-12
 Herramientas necesarias ..................13
 Lista de piezas sueltas .....................13
 Armado ........................................14-20
 Funcionamiento ...........................21-28
 Ajustes ..............................................29
 Mantenimiento ..................................30
 Pedidos de piezas /
servicio
.......................... Pág. posterior
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
7-1/4 in. COMPOUND MITER SAW
SCIE À ONGLETS COMBINÉS
DE 184 mm (7-1/4 po)
SIERRA INGLETEADORA COMPUESTA
DE 184 mm (7-1/4 pulg.)
TS1144

Ryobi TS1144 Specifications

General

Brand	Ryobi
Model	TS1144
Category	Saw
Language	English

Summary

General Safety Rules

Miter Saw Specific Safety Rules

Additional Safety Rules

Electrical

Extension Cords

Tools Needed

Assembly

Unpacking

Steps for safely removing the miter saw from its packaging and initial inspection.

Mounting Holes

Details on the saw's mounting holes for securing it to a workbench or stand.

Miter Lock Knob

Squaring the Blade to the Fence

Procedure for aligning the saw blade perpendicular to the fence for accurate cuts.

Squaring the Blade to the Miter Table

Procedure for aligning the saw blade perpendicular to the miter table for accurate cuts.

Operation

Cutting With Your Compound Miter Saw

To Miter Cut/Cross Cut

Instructions for performing miter and cross cuts on the workpiece.

To Bevel Cut

Instructions for performing bevel cuts, angling the saw blade relative to the workpiece.

To Compound Miter Cut

Instructions for performing cuts that involve both miter and bevel angles simultaneously.

Cutting Compound Miters

Cutting Crown Molding

Adjustments

Maintenance