Saab 9-4X Owner Manual - 2011
Seats and Restraints 3-5
To adjust the seatback, see
Reclining Seatbacks on page 3‑8.
To adjust the lumbar support, see
Lumbar Adjustment on page 3‑7.
Memory Seats
On vehicles with the memory
feature, the “1” and “2” buttons on
the outboard side of the driver seat
are used to manually save and
recall features. These features
include the driver seat and
adjustable throttle and brake pedal
positions, if equipped. It also may
include the outside mirror positions,
if programmed. These manually
stored positions are referred to as
Button Memory positions.
Not all vehicles with the memory
feature will have programmable
outside mirrors.
The vehicle will also automatically
save driver seat, adjustable throttle
and brake pedal positions, and the
outside mirror positions to the
current driver Remote Keyless
Entry (RKE) transmitter when the
ignition is turned off. These
automatically stored positions are
referred to as RKE Memory
positions. See Remote Keyless
Entry (RKE) System Operation on
page 2‑3 for more information on
the RKE transmitter.
Storing Button Memory Positions
To save positions into Button
Memory:
1. Adjust the driver seat, seatback
recliner, adjustable pedals, and
both outside mirrors to the
desired driving positions.
2. Press and release the
MEM (Memory) button.
3. Press “1” until a beep sounds.
4. Repeat Steps 1 through 3 for a
second driver using “2.”
Recalling Button Memory
Positions
To recall the manually saved Button
Memory positions, press and hold
“1” or “2.” The driver seat, adjustable
pedals, and outside mirrors move to
the positions stored to those buttons
when pressed. Releasing “1” or “2”
before the stored positions are
reached stops the recall.
To Next Page
Loading...
