EasyManua.ls Logo

Saab 9-4X 2011 - Page 60

Saab 9-4X 2011
414 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Black plate (6,1)
Saab 9-4X Owner Manual - 2011
3-6 Seats and Restraints
If something has blocked the driver
seat and/or the adjustable pedals
while recalling a memory position,
the recall may stop. Remove the
obstruction; then press and hold the
appropriate manual control for the
memory item that is not recalling
for two seconds. Try recalling the
memory position again by pressing
the appropriate memory button.
If the memory position is still not
recalling, see your dealer for
service.
Recalling RKE Memory Positions
(Memory Remote Recall)
The Memory Remote Recall feature
can recall the driver seat, adjustable
pedals, and outside mirrors to
previously stored RKE Memory
positions when entering the vehicle.
Every time the ignition is placed in
OFF or ACCESSORY, the positions
of the driver seat, outside mirrors,
and adjustable pedals are
automatically stored to the RKE
transmitter that was used to start
the vehicle. These positions are
called RKE Memory positions and
may be different than the previously
mentioned Button Memory positions
saved to the 1 or 2 buttons. To
automatically recall RKE Memory
positions, unlock the driver door
with the RKE transmitter, and open
the driver door. On vehicles with
keyless access, opening the driver
door when an RKE transmitter is
present will activate the RKE
Memory recall. If the driver door is
already open, pressing the RKE
transmitter K button will also
activate the RKE Memory recall.
The driver seat, outside mirrors, and
pedals will move to the previously
saved RKE Memory positions.
This feature is turned on or off using
the vehicle personalization menu.
See Memory Remote Recall
under Vehicle Personalization on
page 542 for more information.
To stop recall movement, press
one of the memory, power mirror,
or power seat controls, or the
adjustable pedal switch, if equipped.
If something has blocked the driver
seat and/or the adjustable pedals,
if equipped, while recalling a
memory position, the recall may
stop. Remove the obstruction; then
press and hold the appropriate
manual control for the memory item
that is not recalling for two seconds.
Try recalling the memory position
again by opening the driver door
and pressing the RKE transmitter K
button. If the memory position is still
not recalling, see your dealer for
service.
Easy Exit Driver Seat
This feature moves the seat
rearward allowing the driver
more room to exit the vehicle.
To activate, place the ignition in
OFF or ACCESSORY and open
the driver door. If the driver door is
already open, placing the ignition in
OFF or ACCESSORY will activate
the easy exit driver seat.

Table of Contents

Related product manuals