900 Convertible Top Troubleshooting Guide
Miscellaneous
1.
OTC
B1605,
top works ok
-
Clear DTC’s.
Operate top and recheck for DTC’s. If DTC’s do not reoccur, ignore this
DTC.
(Note that this DTC is frequently a “phantom” code and can be ignored if no
operation problems are experienced.)
2.
ACC does not switch to manual mode when lowering top
-
SID
misprogrammed?
Reprogram SID to “hood”.
3.
ACC does not switch to automatic mode when raising top
-
Stuck/defective header switch?
Replace switch per PSI
04/97-0754.
Replace housing if necessary.
4. No Convertible
S/D
messages
-
SID misprogrammed?
Reprogram SID to “hood”.
5. Side rail seal drooping
-
Side rail seal not secured?
24
06109197
To Next Page
