I
1
iI
.ubricating
the weatherseals with GM Lubricant, P/N 3634770 to minimize risk of
squeak-
ng
and creaking complaints. Lubricate once and let it dry. Lubricate a second time before
eleasing vehicle to customer.
‘arts:
iM
Lubricant
3634770: obtain from GM Dealer
%ough
to lubricate approximately
10
cars)
Figure 6. Lubricating weatherseals
1.
Operate the top using the “ROOF” switch until it is halfway raised and the Tonneau cover is fully upright. The
side windows should be raised and the door windows lowered.
I
2.
Apply GM Lubricant to the surfaces of the weatherseals in contact with the glass as shown in Figure 6 above.
Rub in the lubricant with a cloth and allow it to dry. Reapply the lubricant before releasing the
vehrcle
to your
customer.
Page 7 of 24
To Next Page
Loading...
