900 Convertible Top Troubleshooting Guide
Inoperative
Top/Operational Problems/Unsatisfactory Performance
(Note that problems
are listed in order of top operating sequence, beginning with top fully
raised)
23
First bow comes down on header
Top out of adjustment
See page 16
crooked, straightens as 5th bow
latches
24
Access flaps won’t open (raise) 5th bow latcli motor jammed with
See page 16
when raising top
-
flaps may be latches closed or inoperative
broken off
25 Tonneau cover slams closed
a. Tonneau cover catches on
fabric when closing
See pages 17
b. Tonneau cover latches not
aligned properly
c. Tonneau motor drive shaft
twisted
26
5th
Bow
won’t close properly
a.
5th bow latch motor jammed
See page 18
b. Misaligned strikers
c. Incorrect programming?
27
SID does not beep when top is
a.
SID
rncorrectly
programmed
See page 18
fully raised
b. 5th bow latch microswitches or
Tonneau cover latch
micro-
switches not closing properly
E
06/09/97
To Next Page
Loading...
