11-16 Maintenance and service
¢ Replacing the air cleaner ele-
ment
q Turbo models
1. Unsnap the two clamps holding the air
cleaner case cover.
1) Air cleaner case cover
2) Air cleaner element
2. Open the air cleaner case cover and
remove the air cleaner element.
3. Clean the inside of the air cleaner cov-
er and case with a damp cloth and install
a new air cleaner element.
4. To install the air cleaner case cover, in-
sert the two projections on the air cleaner
case cover into the slits on the air cleaner
case and then snap the two clamps on the
air cleaner case cover.
B00024
B00025 B00026
A1910BE-A-GSAAB.book Page 16 Tuesday, September 6, 2005 8:37 AM
To Next Page
Loading...
