6. MAINTENANCE
Before cleaning, maintenance or repair work, take out
the ignition key and read the relevant instructions. Wear suitable clothing
and strong gloves
Never get rid of used
oil, fuel or other pollutants in unauthori-
sed places!
General lubrication
Follow the diagram shown here that indi-
cates all points to be lubricated and the
type of lubricant to be used.
General lubrication should be carried out
at least once a month or whenever the
machine is to be left unused for a long
period.
Engine
Follow the instructions in the engine
booklet regarding methods and frequency
of maintenance (air, oil and fuel filters,
changing oil, cleaning spark plugs, etc.).
To empty the engine oil, unscrew the oil
plug (1). When refitting the plug, carefully
re-position the seal.
Hydrostatic unit
This is a maintenance-free single sealed block.
IMPORTANT
!
ATTENTION!
eng 27MAINTENANCE
To Next Page
Loading...
