Battery
To ensure long life to the battery it is essential to keep it carefully maintained.
The battery on your machine must be charged before using for the first time
and, subsequently, if the machine is stored, before the next time of starting up.
– To ensure long life to the battery it is essential to keep it carefully maintained.
The battery on your machine must be charged before using for the first time
and, subsequently, if the machine is stored, before the next time of starting up.
– A flat battery must be recharged as soon as possible.
Recharging must be done using a battery charger at con-
stant voltage. Other recharging systems can irreversibly damage the battery.
The machine has a connector (1) for
recharging, to be connected to the corre-
sponding connector of the special “CB01”
maintenance battery-charger, available on
request (chapter 8).
This connector must
only be used for connection to the CB01
maintenance battery-charger. For its
use:
– follow the instructions given in the relative instruction booklet,
– follow the instructions given in the battery booklet.
Changing bulbs (if fitted)
Bulbs (18W) have a bayonet fitting and
are installed in the bulb holder which can
be taken off by turning it anti-clockwise
using pliers.
IMPORTANTE
IMPORTANT
eng 28 MAINTENANCE
To Next Page
Loading...
