Saeco SUP040 E RB - Measuring and Adjusting Water

US English
7
31
Rinse and fill it with fresh water; do not exceed the level
(MAX) indicated on the tank.
When filling the water
tank, use sterile disposable
gloves to prevent
bacteriological
contamination.
Insert the water tank back into its seat and refit the lid.
Refit the protection cover as described in section "Closing
the Upper Lid".
7.5 Measuring and Adjusting
Water Hardness
Measuring water hardness is very important in order to
correctly manage the "INTENZA+" filter and the
frequency with which the machine must be descaled.
Immerse the water hardness test strip in water for 1
second.
the test strip is only valid
for one measurement.
Check how many squares change colour and then consult
the table.
The numbers correspond to the settings indicated in the
following machine adjustments.
1 HARDNESS 1 (very soft)
2 HARDNESS 2 (soft)
3 HARDNESS 3 (medium)
4 HARDNESS 4 (hard)
Switch to machine programming mode as described in
section "Access to the Technical Menu".
Select the "SETTINGS" option and press the "OK" button.