US English
9
61
Before turning on the machine, ensure that the plug is
correctly inserted in the power socket. To turn on the
machine, move the power button on the back of the
machine to "I".
After carrying out a check cycle, the machine goes into
stand-by mode. During this phase, the "Stand-by" button is
flashing. To turn on the machine simply press the
"Stand-by" button. This function may be disabled by a
specialised technician.
Once warm-up has been
completed, the machine
performs a rinse cycle of
the internal circuits. A small
amount of hot water is
dispensed during this
process. Wait for this cycle
to be completed.
The machine may feature a
payment system installed
by the service provider.
If some or all of the
machine buttons are off
after the preparation steps,
the corresponding
products can only be
dispensed after paying the
vend price.
Pay the vend price before
dispensing any beverage.
Prices are set
independently by the
service provider.
9.2 Warm-up and Rinsing
Upon start-up, the machine activates the warm-up phase.
Wait until it is completed.
The progress bar indicates
that the machine is heating
up the system.
Once warm-up has been completed, the machine performs
a rinse cycle of the internal circuits.
To Next Page
Loading...
