Saeco SUP040 E RB - Technical Menu Programming

US English
8
44
8.3 Technical Menu
Programming
The structure of the technical menu is detailed in the
"Structure of the Technical Menu" section.
The "Description of Messages in the Technical Menu"
section describes all the options in the technical menu.
8.3.1 Access to the Technical
Menu
Proceed as follows to access the machine technical menu.
• Press the "Menu" button to access the main menu.
• Scroll the main menu until you reach the “Tech Menu”
option.
• Press the "OK" button.
The above mentioned
procedure can only be
used to access the
technical menu when the
machine has reached
operating temperature;
The menus should be
PASSWORD-protected.
The PASSWORD will not
be requested if set on the
default value (0000). It
should be changed upon
first use to prevent
unauthorised access. After
this change, the password
must be entered each time
the display shows:
If you do not enter the
password within a few
seconds, the machine will go
back to the previous screen.
Refer to the "Setting the technical menu password" section
to set the PASSWORD.