US English
9
64
9.6 Types of LED light / machine
operation
The machine is equipped with two types of LED light -
blue and white - to illuminate the dispensing area. Their
operation is explained below.
• Machine in warm-up phase: both blue and white LED
lights continually fade on and off.
• Machine ready for use: only the blue LED lights are steady on.
• Machine dispensing coffee or mixed beverages: the blue
LED lights are off and the white LED lights are steady on.
When the beverage is ready, the white LED lights fade on
and off for 4 seconds.
• Machine dispensing hot water: both the blue and white
LED lights are off. Once the water has been dispensed,
the LED lights are illuminated ready for use.
9.7 Brewing Coffee
To brew coffee, press:
the "Espresso" button for an espresso;
the "Espresso x2" button to brew two espressos;
the "Coffee" button to brew a coffee;
Then the brewing cycle starts:
To brew 2 coffees, the
machine automatically
grinds and doses the
correct amount of coffee.
Brewing two cups of coffee
requires two grinding
cycles and two brewing
cycles, which the machine
carries out automatically.
Once the prebrewing cycle has been completed, coffee
begins to come out of the dispensing spout. Coffee
brewing stops automatically when the preset level is
reached. coffee dispensing can be stopped by pressing the
selected product button again or the "ESC" button.
The machine is adjusted to
brew a true Italian
espresso coffee. This
feature may slightly
lengthen the brewing time,
allowing the intense coffee
flavour to fully develop.
To Next Page
Loading...
