US English
10
88
Remove the ring from the Cappuccinatore.
Turn and lift the Cappuccinatore cover and remove it
from the Cappuccinatore body.
Remove the valve from the Cappuccinatore.
Wash the parts under running water. Make sure any milk
deposits/residues are removed.
After washing, reassemble the parts following the same
procedure used for disassembly, but in reverse order.
After washing and
reassembling the
Cappuccinatore, it can be
installed back in the
machine. Use the hooks
placed on the left side of
the machine to attach the
suction tube.
If the coiner is installed, fix the tube as shown in the figure
by using the previously removed cover.
To Next Page
Loading...
