US English
10
92
10.2.8 Brew Group Cleaning
The brew group should be cleaned whenever the coffee
bean hopper is filled, or at least once a week. Turn off the
machine by switching the power button to the "O"
position and remove the plug from the socket.
Open the service door with the supplied key.
Remove the brew group by pulling it by the handle and
pressing the «PRESS» button. The brew group must be
washed with lukewarm water only. Do not use any detergent.
Wash the brew group with lukewarm water; carefully
wash the upper filter. Before placing the brew group in its
seat, ensure that there is no water left in the brewing
chamber.
Lift the rear side of the inner drawer to unlock it.
Take out the inner drawer, wash it and place it back in its
seat.
When fitting the drawer,
carry out the same
operations performed for
its removal, but in reverse
order.
Make sure that the brew group is in the off position. The
two reference marks must match.
To Next Page
Loading...
