TS7000 MATERIAL HANDLER OPERATORS MANUAL - VERSION I
Page 5
SYSTEM STARTUP – FIGURE 2 & 3
The TS7000 display (LMI) will automatically come on when you switch the machine on, and
the buzzer will sound once. The system will run a CRC (cyclic redundancy check) to make
sure that all raw data is correct.
Once the system has completed the CRC the buzzer will sound again and a set of internal
diagnostics (watchdogs) will be utilised to verify that all inputs and outputs are working
correctly.
Figure 2 Figure 3
To Next Page
Loading...