Safeaid TS7000 - Error Messages - Figure 6 and Table 1

TS7000 MATERIAL HANDLER OPERATORS MANUAL - VERSION I Page 9
ERROR MESSAGES - FIGURE 6 AND TABLE 1
The TS7000 will sound a buzzer and the green block will be replaced by an orange or red
block at the top of the screen if any error occurs on the system. These errors are displayed
at the bottom of the screen as either an error code only or the error description with the error
code e.g. Anti-2-Block E002 where program selection is normally displayed. If more than one
error occurs the errors will scroll on the bottom until rectified.
Figure 6
For all the errors, we have given an indication of the problem and the common
solution to the problem. These can be done by the operator or an individual who
has some basic crane knowledge. If the given solution does not work, please
contact the original installer or someone from our service network where we can
try and help telephonically or send a technician to repair the system.