Need help?Do you have a question about the Sagem Fast 800 and is the answer not in the manual?
Provides a general overview of the SAGEM F@stâ„¢ 800/840 modem models and their features.
Details the hardware and software prerequisites needed to use the SAGEM F@stâ„¢ 800/840 modem.
Explains how to connect the SAGEM F@stâ„¢ 800/840 modem to the computer and network.
Step-by-step guide for connecting the SAGEM F@stâ„¢ 800 model to a telephone line.
Step-by-step guide for connecting the SAGEM F@stâ„¢ 840 model to a telephone line.
Guides users through the installation process of the SAGEM F@stâ„¢ 800/840 modem on Windows systems.
Instructions for establishing and terminating internet connections using the SAGEM F@stâ„¢ 800/840 modem.
Details the steps to connect to the internet via the ADSL icon on Windows.
Provides instructions on how to disconnect from the internet using the ADSL connection status.
Explains how to check the modem's installation status and use diagnostic tools.
Steps to verify if the SAGEM F@stâ„¢ 800/840 modem has been correctly installed in Windows.
Describes how to use the diagnostic application to monitor the ADSL line status and modem performance.
Provides instructions for removing the SAGEM F@stâ„¢ 800/840 modem software from a Windows system.
Guides users through the installation process of the SAGEM F@stâ„¢ 800/840 modem on Mac OS X systems.
Instructions for establishing and terminating internet connections using the SAGEM F@stâ„¢ 800/840 modem on Mac OS X.
Steps to configure and establish an internet connection via PPPoE on Mac OS X.
Provides instructions on how to disconnect from the internet using the Internet Connect application on Mac OS X.
Explains how to check the modem's installation status and use diagnostic tools on Mac OS X.
Steps to verify the correct configuration and network settings for the modem in Mac OS X.
Describes how to use the SAGEM Monitor diagnostic application on Mac OS X for status and configuration.
Details the 'Operation' screen of the SAGEM Monitor, showing ADSL status and modem parameters.
Explains the 'Statistics' screen of the SAGEM Monitor, showing ADSL and ATM performance data.
Describes the 'Configuration' screen of the SAGEM Monitor for setting ADSL and ATM parameters.
Provides instructions for removing the SAGEM F@stâ„¢ 800/840 modem software from a Mac OS X system.
Explains the meaning and function of the ADSL and PWR LEDs on the front panel of the modem.
Discusses troubleshooting steps when the ADSL LED is blinking, indicating connection attempts.
Provides troubleshooting steps for when both the ADSL and PWR LEDs are off.
Offers troubleshooting for the scenario where the ADSL LED is off but the PWR LED is on.
Explains troubleshooting when ADSL LED is steady and PWR LED is on, indicating synchronization but no PPP link.
Details important safety precautions for installing and using the SAGEM F@stâ„¢ 800/840 modem.
Lists the mechanical and interface specifications for the SAGEM F@stâ„¢ 800/840 modem.
Outlines software, ATM, encapsulation, and OS compatibility for the modem.
Specifies the operating system versions compatible with the SAGEM F@stâ„¢ 800/840 modem.
Provides definitions for technical terms used throughout the SAGEM F@stâ„¢ 800/840 user guide.
Explains environmental considerations, packaging, and product disposal according to WEEE directive.
To Next Page
General