29
Calling a stored number
• Pick up the phone; you should hear a dial tone.
• Press the memory button on which the number was
recorded.
• The phone number is dialled automatically.
OR
(only for C130 ECO)
• Press . The phone goes into speakerphone mode.
• Leave the handset on its base.
• Press the memory button
on which the number was
recorded; the number is dialled automatically.
Checking a stored number
If you want to check which number was recorded on the rapid
memory key :
• From the standby screen, press the memory key .
• The number programmed on that key is displayed on the
screen.
Memory keys
Store a number in memory
• Press then enter the number to be recorded.
• Select the memory key then select the keypad key
(0-9 except 1) you want to program the number on.
After a few seconds, the telephone reverts to the standby
screen: the number is now programmed in the selected
memory key.
Repeat the operation to record a rapid access number on
another key.
To change the number stored on a memory key, save
the new number directly on the memory key in
question.
To Next Page
Loading...
