30
Calling a stored number
• Pick up the phone; you should hear a dial tone.
• Press the memory button then hold down the
keypad key (0-9 except 1) on which the number was
recorded.
• The phone number is dialled automatically.
OR
(only for C130 ECO)
• Press . The phone goes into speakerphone mode.
• Leave the handset on its base.
• Press the memory button then hold down the
keypad key (0-9 except 1) on which the number was
recorded.
The phone number is dialled automatically.
Checking a stored number
If you want to check which number was recorded on one of the
memory keys :
• From the standby screen, press the memory key
then press the key (0 or 2- 9) .
• The number programmed on that key is displayed on the
screen.
To Next Page
Loading...
