SAGEMCOM FAST1704 User Manual

Error! Style not defined.
18
The data is not encrypted when it is transferred from the device to
the client station. This is the default option.
64-bit WEP
Network Authentication: Select the authentication mode for the
selected wireless LAN of SSID to be open or shared.
WEP Encryption: Enable WEP Encryption.
Encryption Strength: click the desired Data Security level to be
64-bit.
Current Network Key: Select one of network key that you set
on the Key boxes as default one.
Network Key 1 to 4: Enter 5 ASCII characters or 10
hexadecimal digits for 64-bit encryption keys to fill out WEP
keys box. The system allows you to type in 4 kinds of the WEP
key.
Click Save/Apply to save the wireless security options and make the
modification effect.
Error! Style not defined.
19
128-bit WEP
Encryption Strength: Click the desired Data Security level to be
128-bit.
Current Network Key: Select one of network key that you set
on the Key boxes as default one.
Network Key 1 to 4: Enter 13 ASCII characters or 26
hexadecimal digits for 128-bit encryption keys to fill out WEP
keys box. The system allows you to type in 4 kinds of the WEP
key.
The authentication modes are as follows: 802.1X, WPA,
WPA-PSK,WPA2, WPA2 –PSK, Mixed WPA2/WPA, Mixed
WPA2/WPA –PSK.
After proper configuration, click Save/Apply to save the wireless
security options and make the modification effect.
3.4 Management
3.4.1 Settings
3.4.1.1 Settings Backup
Click Backup Settings to back up the DSL router configuration.

SAGEMCOM FAST1704 Specifications

General

Brand	SAGEMCOM
Model	FAST1704
Category	Network Router
Language	English