Error! Style not defined.
8
recommended to change these default values after logging in
to the DSL router for the first time.
Step 4 Click OK to log in or click Cancel to exit the login page.
3.2 Summary of Device Information
Error! Style not defined.
9
Default Gateway: In the bridging mode there is no gateway. In
other modes, it is the address of the uplink equipment, for
example, PPPoE/PPPoA.
DNS Server: In the PPPoE / PPPoA mode, it is obtained from
the uplink equipment. In the bridging mode, there is no DNS
Server address and you can manually enter the information.
3.3 Advanced Setup
Choose Advanced Setup > WAN, and the following page appears.
3.3.1 Configuring PPPoE
Step 1 Click Add and the following page appears. In this page, you
can modify VPI/VCI, service categories, and QoS.
To Next Page
Loading...
