6105
6105
6105
6105 Belt
Belt
Belt
Belt Feeder
Feeder
Feeder
Feeder integrator
integrator
integrator
integrator ---
---
---
--- User
User
User
User ’
’
’
’ s
s
s
s Guide
Guide
Guide
Guide ---
---
---
---
12
3.2.2
3.2.2
3.2.2
3.2.2 Alarm
Alarm
Alarm
Alarm Menu
Menu
Menu
Menu
O n the Run Menu, pressing “ SYS ALRM ” soft key enters the following screen:
Use Up/Down scroll keys to move the cursor to the desired item and press ENT to confirm and then
change the settings.
3.2.3
3.2.3
3.2.3
3.2.3 PID
PID
PID
PID Control
Control
Control
Control Menu
Menu
Menu
Menu
In the Run Menu, pressing “ PID BMP ” soft key enters the following screen:
Use Up/Down scroll keys to move the cursor to the desired item and press ENT to confirm and then
change the settings.
There are two parameters settable on this screen. “ Set Rate ” represents the flow rate setting value.
“ Output ” represents the control output.
When the “ Setting Mode ” is set to “ LOCAL ” , the “ Set Rate ” setting is allowed to be manually input.
When the “ Control Mode ” is set to “ MANU ” , the “ Output ” setting is allowed to be manually input.
2006-3-21 12:00:00 Scale#1
ALARM DETAILS
ALARM NAME: [LO SPEED ]
ALARM DATE: [ 2005-06-08 ]
ALARM TIME: [ 12:00:00 ]
ALARM ACTION: [ NEW ]
System running!
RUN ALRM PAGE PAGE
RSET DOWN UP
2006-3-21 12:00:00 Scale#1
8 00 t /h
SET RA TE : [ 800 t/h ]
OUTPUT : [ 100 % ]
Press
↑
or
↓
key, then press ENT!
ZERO PREV
CAL RUN
To Next Page
Loading...