To Next PageTo Next Page
Need help?Do you have a question about the Saimo 6105 and is the answer not in the manual?
General| Brand | Saimo |
|---|---|
| Model | 6105 |
| Category | Accessories |
| Language | English |
Provides an overview of Saimo Weigh Belt Feeder Systems and their applications.
Details the technical parameters of the 6105 integrator, including environment and power.
Highlights the key functionalities of the Saimo 6105 integrator for belt scales.
Information on installation, configuration, and initial programming of the 6105 belt feeder integrator.
Guidelines for physically installing the integrator and essential safety measures during setup.
Procedures for correctly connecting the external power supply to the integrator.
Describes the hard and soft keys on the front panel and their functions.
Details operations available in the Run Menu, including reset and alarm viewing.
Guides through the initial configuration steps for the integrator.
Steps for performing automatic and manual span calibration.
Process for calibrating the integrator using actual material.
Adjusting PID control parameters like Proportional, Integral, and Derivative.
Accessing and configuring system parameters like display, date, and time.
Procedures for automatic and manual zero calibration of the belt scale.
Setting up test duration for automated calibration processes.
Configuring input and output ports for external signals and alarms.
Setting up communication parameters like baud rate and protocol.
Configuring various alarm thresholds and delays for rate, load, and speed.
Setting parameters for loadout operations, including weight and pre-values.
Managing system and operator passwords for security.
Viewing system status, weight, speed, and pulse diagnostics.
Defining and viewing working shifts and class statistics.
Recommended daily checks to minimize downtime and extend equipment life.
Systematic approach to diagnose and locate faults in the integrator system.
Procedures for checking power supply, speed input, and load cell input signals.
Troubleshooting current output and setting constants after service.
Introduction to the speed sensor and its function in monitoring belt speed.
Guidelines for inspecting, unpacking, and storing the speed sensor.
Step-by-step instructions for installing the speed sensor.
Procedures for mounting the speed sensor mechanically on the conveyor.
Steps for connecting the speed sensor electrically to the integrator.
Explanation of how the speed sensor generates a signal proportional to shaft speed.
