H1 Series
Chapter 4 Instructions for Installation
4.1 Safety Instructions
· Dangerous to life due to potential fire or electricity shock.
· Do not install the inverter near any inflammable or explosive items.
· This inverter will be directly connected with HIGH VOLTAGE power generation
device; the installation must be performed by qualified personnel only in compliance
with national and local standards and regulations.
· This equipment meets the pollution degree II.
· Inappropriate or the harmonized installation environment may jeopardize the life
span of the inverter.
· Installation directly exposed under intensive sunlight is not recommended.
· The installation site must be well ventilated.
4.2 Pre-installation Check
4.2.1 Check the Package
Although SAJ’s inverters have surpassed stringent testing and are checked
before they leave the factory, it is uncertain that the inverters may suffer
damages during transportation. Please check the package for any obvious
signs of damage, and if such evidence is present, do not open the package
and contact your dealer as soon as possible
4.2.2 Check the Assembly Parts
Please refer to the Packing List inside the package container.
To Next Page
Loading...
Need help?
General
