SAJ H1 Series - Installation Method and Position

H1 Series
- 15 -
4.3 The Determination of the Installation Method and
Position
4.3.1 Mounting Method
The equipment employs natural convection cooling, and it can be installed
indoor or outdoor.
Do not expose the inverter to direct solar irradiation as this could cause
power derating due to overheating.
Figure 4.1 Mounting Method
(2) Mount vertically or tilted backwards by max. 15°. Never install the
inverter tilted forwards, sideways, horizontally or upside down.
(3) Install the inverter at eye level for convenience when checking the LCD
display and possible maintenance activities.
(4) When mounting the inverter, please consider the solidness of wall for
inverter, including accessories. Please ensure the Rear Panel mount tightly.
To make sure the installation spot is suitably ventilated, if multiple SAJ hybrid
solar inverters are installed same area.