SAJ H1 Series - Page 53

H1 Series
- 52 -
Battery Setting:
Select “Setting” in menu, press ENT button to enter the secondary menu,
select “Battery Setting” and press ENT button to enter battery parameter
setup interface, as shown below:
2019-08-14 18:26:55
Graph Setting Run-Info About
FloatCharge Voltage:
Battery Type:
Battery Low Voltage:
Battery Potocol:
DisCharge Depth:
Pb Li
PYLON RS485
100
45.0
54.5
Ah
%
V
V
OK
Total Capcity:
20
Figure 6.40 Interface of battery parameter setup
General setting:
Select “Setting” in menu, press ENT button to enter the secondary menu,
select “System Setting” and press ENT button to enter system parameter
setup interface, as shown below:
2019-08-14 18:26:31
Graph Setting Run-Info About
Language Setting
Date&Time Setting
Display Setting
Factory Reset
Clear Energy
Figure 6.41 Interface of system parameter setup
In the interface of system parameter setup, press or to select
corresponding parameter.