H1 Series
In the interface of password input, press ENT button for entering edit status,
press or to adjust the value. ESC button for exiting edit status, select
“OK” to enter next interface.
ENT button pressing time longer than 2 second, LCD will show a prompt box
of input load, press ENT to confirm, inverter begins to enter loading status.
As shown below:
Energy Direction
2019-09-16 18:26:31
1200W 500W
2000W
50.8V
InPut Load!
Message Info
Ok
1200W 500W
2000W
50.8V
InPut Load!
Message Info
Ok
Figure 6.54 Prompt of input load
1
Energy Direction
2019-09-16 18:26:31
1200W 500W
2000W
50.8V
Figure 6.55 Process of input load
ESC button pressing time longer than 2 second, LCD will show a prompt
box of cutoff load, press ENT to confirm, inverter begins to cutoff load. As
shown below:
To Next Page
Loading...
