PRODUCT & PARTS
Product Troubleshooting:
Power Issues:
◦ The bread maker does not turn on: Ensure that the bread maker is
plugged in and switched
to the "On" position.
◦ The bread maker stops during the baking cycle: Check if the bread
maker is overheating. If so, unplug it and allow it to cool down before
using it again.
Kneading and Mixing:
◦ The bread maker does not knead the dough: Ensure that the kneading
paddle is properly inserted into the bread pan.
◦ The bread maker does not mix the ingredients: Verify that the
ingredients are added in the correct order and that the bread maker is
not overloaded.
Baking Issues:
◦ The bread maker does not bake the bread properly: Confirm that the
bread maker is set to the correct baking time and temperature.
Removing Kneading Blades:
◦ Kneading blades cannot be removed from the baking pan: Follow the
cleaning instructions of the user manual. Pour warm water into the
baking pan, wait for 10 minutes, and then drain the water.
Smoke and Odor:
◦ Smoke and burning odor from the radiator when baking: Check if any
ingredients are touching the electric heat pipe. Ensure that the baking
chamber is clean and free from any spilled ingredients.
Display Issues:
◦ H:HH on the display screen: This indicates a high temperature inside
the bread machine or it is still hot from the previous operation. Allow it
to cool down before using it again.
◦ E:E0 on the display screen: This indicates a temperature sensor
malfunction. Contact customer service for assistance.
Bread Sticking:
◦ Bread sticking to the pan: Lightly wipe the inside of the pan with
vegetable oil to prevent sticking.
46
To Next Page
