Sakura Tissue-Tek Film 4740 User Manual

OPERATING INSTRUCTIONS
3.4 Revised 08/08/2013
NOTE: If stopping the prime is required, press the [STOP]
key to abort the prime. If there are bubbles detected in the
priming line, Extended Prime will need to be repeated.
c. Press the [EXIT] key to return to the Setup Menu.
4. Count Reset
The counter value is displayed in the lower left corner
of the display in the standby or operation menu. The
number increases by one (1) each time a slide is
coverslipped.
a. Press the [<] and [>] keys to select option, “4.
Count Reset”, and press the [ENTER] key. The
following screen displays:
b. Press the [ENTER] key to reset the counter and
bring the display back to the Setup Menu.
c. Press the [EXIT] key to return to the Setup Menu
without resetting the counter.
NOTE: When the counter value reaches the number
999999, it automatically resets and returns to zero (0).
5. Key Sound
The key sound can either be turned ON or OFF.
a. Press the [<] and [>] keys to select option, “5.
Key Sound”, and press the [ENTER] key. The
following screen displays:
b. Press the [<] and [>] keys to select ON or OFF.
c. Press the [ENTER] key to save the new setting
and bring the display back to the Setup Menu.
d. Press the [EXIT] key to return to the Setup Menu
without saving the setting.
6. Alarm Volume
There are four available alarm levels to choose from.
Level 4 is the default setting.
a. Press the [<] and [>] keys to select the option, “6.
Alarm Volume”, and press the [ENTER] key. The
following screen displays:
b. Press the [<] and [>] keys to select the desired
alarm volume.
c. Press the [ENTER] key to save the new setting
and bring the display back to the Setup Menu.
d. Press the [EXIT] key to return to the Setup Menu
without saving the setting.
7. Software Version
The last parameter allows the user to access to the
current software version in the instrument.
a. Press the [<] and [>] keys to select option, “7.
Software Version”, and press the [ENTER] key.
The following screen displays:
b. Press the [EXIT] key to return to the Setup Menu
<Alarm>
1/2/3/4
[<] [>] to select
[ENTER] to save
<Count Reset>
Count: 012345
[ENTER] to reset
<Software Version>
N74-900-0
[EXIT] to exit
<Key Sound>
ON/OFF
[<] [>] to select
[ENTER] to save

Sakura Tissue-Tek Film 4740 Specifications

General

Brand	Sakura
Model	Tissue-Tek Film 4740
Category	Medical Equipment
Language	English