1.1 Product Compliance
This product complies with the essential requirements and other relevant provisions of the following EU
Directives: 2014/30/EU, 2014/35/EU, 2014/53/EU and 2011/65/EU. The full text of the EU Declaration of
Conformity is available at the following internet address: www.saluslegal.com.
Always isolate the AC Mains supply before installing or working on any components that
require 230 VAC 50Hz supply.
RT310i Installation Manual 03
Care for the natural environment is of paramount importance to us. The awareness that we
manufacture electronic devices obliges us to dispose of used electronic components and
devices safely. Therefore the company has received a registration number issued by the Chief
Inspector for Environmental Protection. The crossed out symbol the trash can on the product
means that the product must not be disposed of with ordinary waste containers. Sorting waste
for recycling helps to protect the environment. It is the user’s responsibility to surrender used
equipment to a designated collection point for recycling waste from electrical and electronic
equipment.
• Before starting installation work and before using the product, read the entire manual.
• The information contained in the instructions is essential for proper functioning.
• To avoid accidents resulting in personal injury and material damage, please follow all safety precautions,
specified in this manual.
• The device should not be used by people with limited mental, sensory or mental abilities, without experience,
of insufficient knowledge as well as children.
• Do not use an unassembled device (eg without a cover).
• The device may only be opened by a qualified person.
• Keep electrical devices out of the reach of children and ensure that they do not play with it. Children should
not be left unattended. If necessary, disconnect the control system for the entire room.
• Do not leave the packaging, cabinet, or any loose parts of the device unattended, as they pose a risk to
children.
WARNING!
• Installation must be carried out by a qualified person with appropriate electrical qualifications in accordance
with standards and regulations in force in the given country and in the EU.
• Never try to connect the device other than as described in the manual.
• Before assembly, repair or maintenance as well as during any connection works it is absolutely necessary
disconnect the mains supply and make sure that the terminals and electric wires are not live.
• The device may not be exposed to extreme temperatures, strong vibrations or subjected to mechanical shock.
• The device should not be used in unfavorable environmental conditions or in rooms where there is a
concentration of flammable gases, fumes or dust.
WARNING!
• There may be additional protection requirements for the entire installation that the installer is responsible for
maintaining.
1.2 Safety Information
To Next Page
Loading...
Need help?
General
