24
Using or , enter the PIN
code number. Press to confirm
every digit. Note: The first PIN code
entry is also the setting of a NEW PIN
CODE which must be entered each time
to enter the LANDLORD (Admin) menu.
Press
.
Using
or , navigate to
Landlord submenu and press .
Landlord settings is a pin code protected feature that allows the landlord to set a service reminder on the thermostat that will warn the tenant when the
boiler is due its annual service.
5.7 Landlord settings
5.7.1 PIN code setting
To confirm and exit this option use
button. Then use or
buttons again to move to the
next LANDLORD options (look at the
next chapters)...
Please remember to write
down your pin code so that
you can use the Landlord
menu later without any hassle
from losing it.
1 2 3
4 5
3
6
...To go back to the main screen wait
10 seconds or press button as
long as main screen will be displayed.
To Next Page
Loading...
