To Next PageTo Next Page
Need help?Do you have a question about the Salus RXRT505 and is the answer not in the manual?
General| Brand | Salus |
|---|---|
| Model | RXRT505 |
| Category | Thermostat |
| Language | English |
Lists the EC Directives this product complies with, including EMC and Low Voltage.
Essential safety guidelines for installation and use, emphasizing competent fitting and adherence to regulations.
Overview of the RXRT505 receiver's function, linking to thermostats via RF signal and its key features.
Guidelines for mounting and connecting the RXRT505, covering power, wiring access, and environmental factors.
Details the terminals and their functions for connecting the RXRT505 receiver.
Illustrates common wiring configurations for the RXRT505 receiver with a boiler.
Guide to pairing RT505TX/RT305TX and ST325TX/ST625TX thermostats with the RXRT505 receiver.
Overview of the RXST625 receiver, its function, and RF link to thermostats.
Guidelines for mounting and connecting the RXST625, covering power, wiring access, and environmental factors.
Illustrates common wiring configurations for the RXST625 receiver with a boiler.
Steps to initiate RF pairing mode on the RXST625 receiver for thermostat synchronization.
Explains the meaning of different LED states and combinations on the RXST625 receiver.
Summary of key operations and their functions for controlling the RXST625 receiver.
Details the automatic operation mode of the receiver, including RF signal reception and failsafe behavior.
Description of manual operation where the receiver ignores RF signals and controls the relay directly.
Explains the three user-selectable failsafe settings (ON, CYCLE, OFF) and their LED indications.
Introduction to the RXVBC605 as an RF boiler control, providing ON/OFF switching for thermostats and its features.
Critical safety warnings regarding electrical components, mains isolation, and ESD precautions for mounting.
Step-by-step instructions for physically installing the RXVBC605 unit onto the boiler.
Guide to pairing the RXVBC605 with a thermostat, ensuring AUTO mode and using the SYNC button.
Details the LED indicator, mode switch, and SYNC button functions for the RXVBC605.
Introduction to the RXWBC605 as an RF boiler control, providing ON/OFF switching for thermostats and its features.
Information on the typical RF receiving range and factors influencing transmission distance.
Critical safety warnings regarding electrical components, mains isolation, and ESD precautions for mounting.
Step-by-step instructions for physically installing the RXWBC605 unit onto the boiler.
Explains the operation of the RXWBC605 boiler module in AUTO, MANUAL ON, and OFF modes.
Details the LED indicator, mode switch, and SYNC button functions for the RXWBC605.
Guide to pairing the RXWBC605 with a thermostat, ensuring AUTO mode and using the SYNC button.
Technical details for RXRT505 including RF settings, operating range, and environmental parameters.
Technical details for RXST625 covering power, switching, RF settings, and protection rating.
Technical details for RXVBC605 including RF settings, operating range, and environmental parameters.
Technical details for RXWBC605 including RF settings, operating range, and environmental parameters.
Blank page designated for user notes and additional remarks.
Information regarding the product's warranty, covering defects, duration, and service procedures.
