26
Press .
The LOCKTEMP parameter determines
the set temperature that will be
maintained by the boiler after
exceeding the current boiler service
date. This temperature cannot be
changed until the boiler is serviced
again.
Provide the number to a trusted
maintenance technician. It will be
available in the notification for easier
contact regarding the renewal of the
boiler service.
Using
or , select the
lock temperature and then press
.
Using or , enter the
phone number. Press to
confirm every digit.
To confirm and exit this option use
button. Then use or
buttons again to move to the
next LANDLORD options (look at the
next chapters)...
7 8
9 10
3
11
...To go back to the main screen wait
10 seconds or press button as
long as main screen will be displayed.
To Next Page
Loading...
