Sam4s ER-180U Series - Page 14

3. Installation and Operation
3-4 SAM4S ER-180U SERIES
3-1-3. Program Download
No
Description
5
- Run the ‘ER-180U Download’’ program.
- Click ‘OPEN’ button to select binary file. If a binary file is selected, Version, Checksum and Date
will be displayed.
- Choose COM Port of PC and click ‘START’ button.
- When download is completed, ‘100%’ will be displayed.
- Unplug the DC power cord.
- Unplug the download cable
- Reassemble drawer and assemble the screw as original status.
- Plug the DC power cord.
- Do the RAM ALL CLEAR and program other settings again (date and time..)