Sam4s ER-180U Series - Operation

3. Installation and Operation
SAM4S ER-180U SERIES 3-5
3-2 Operation
Note: Before using this Electronic Cash Register (ECR) for the first time, leave it powered ON in the REG mode
for a at least 24 hours. This allows the Ms-Lithium battery, which maintains the ECR’s memory while the
power is OFF, to fully charge.
3-2-1 Mode
The position of the Mode determines the action of the ECR. The modes are as shown in Table 3-1
Table3-1 Mode Function
MODE Number Display Function
VOID
1
Use to void (correct) items outside of a sale.
OFF 2 The Register is inoperable.
REG
3
Use for normal registrations.
X
4
Use to read register reports and perform other manager functions.
Z
5
Use to read register reports and reset totals to zero.
P
6
Use to program the register.
S
7
Use for H/W tests and special setting.